Bed Mounted Spreaders

Bed mounted V-Box Spreaders are some of the most popular models used by commercial Snow Removal business. V-Box Spreaders are designed to fit into a huge variety of trucks and can fill almost any need. Nearly all of the major manufacturers used at MTE have Bed Mounted Spreaders available, so whatever you are looking for, Mid-State will have what you want.

SnowEx Spreaders

V-Maxx Spreaders

When it comes to spreading, the V-Maxx series leads the industry in every way. These spreaders have the highest capacity of all SnowEx spreaders, and they feature a patented auger system for handling any combination of materials. They also include an inverted “V” baffle, attached vibrator, quick-connect spinner assembly, and independent auger and spinner controls. Of course, V-Maxx spreaders also come with SnowEx’s distinctive polyethylene construction and low maintenance features.

  • SP-7550

    Specifications:

    • Capacity: 1.4 cu. yd. (1.07 cu. m)
    • Spreading Width: Up to 40′ (12.2 m)
    • Spreading Material: 50/50 sand/salt mix, 100% coarse sand and 100% bulk salt (with added interior baffle inside hopper)
    • Power: Electric, Dual 12-volt DC direct-drive motors

    More info. on the manufacturer’s website.

  • SP-8500 / SP-8500-H

    This spreader is now available in a hydraulic configuration, call for details.

    Specifications:

    • Capacity: 2.0 cu. yd. (1.6 cu. m)
    • Spreading Width: Up to 40′ (12.2 m)
    • Spreading Material: 50/50 sand/salt mix, 100% coarse sand and 100% bulk salt (with added interior baffle inside hopper)
    • Power: Electric, Dual 12-volt DC direct-drive motors (electric models only)

    More info. on the manufacturer’s website.

  • SP-8500 / SP-8500-H

    This spreader is now available in a hydraulic configuration, call for details.

    Specifications:

    • Capacity: 3.0 cu. yd. (2.3 cu. m)
    • Spreading Width: Up to 40′ (12.2 m)
    • Spreading Material: 50/50 sand/salt mix, 100% coarse sand and 100% bulk salt (with added interior baffle inside hopper)
    • Power: Electric, Dual 12-volt DC direct-drive motors (electric models only)

    More info. on the manufacturer’s website.

  • SP-9500 / SP-9500-H

    This spreader is now available in a hydraulic configuration, call for details.

    Specifications:

    • Capacity: 4.0 cu. yd. (3.1 cu. m)
    • Spreading Width: Up to 40′ (12.2 m)
    • Spreading Material: 50/50 sand/salt mix, 100% coarse sand and 100% bulk salt (with added interior baffle inside hopper)
    • Power: Electric, Dual 12-volt DC direct-drive motors (electric models only)

    More info. on the manufacturer’s website.

Vee Pro Spreaders

Ideal for smaller contractors, Vee Pro spreaders have a smaller capacity than the V-Maxx series, but feature the professional-grade quality you expect from a SnowEx. They include a 2-stage auger system, dual variable speed digital controller, vibrator, quick-connect spinner assembly, fully electric drive and polyethylene construction.

  • SP3000

    This spreader is now available in a hydraulic configuration, call for details.

    Specifications:

    • Capacity: 0.5 cu. yd. (0.4 cu. m)
    • Spreading Width: Up to 40′ (12.2 m)
    • 50/50 salt/sand (with OFK-020 Optimum Flow Kit) and bulk salt
    • Power: Electric, Dual 12-volt DC direct-drive motors

    More info. on the manufacturer’s website.

  • SP6000

    This spreader is now available in a hydraulic configuration, call for details.

    Specifications:

    • Capacity: 1.0 cu. yd. (0.8 cu. m)
    • Spreading Width: Up to 40′ (12.2 m)
    • 50/50 salt/sand (with OFK-020 Optimum Flow Kit) and bulk salt
    • Power: Electric, Dual 12-volt DC direct-drive motors

    More info. on the manufacturer’s website.

  • SP7500

    This spreader is now available in a hydraulic configuration, call for details.

    Specifications:

    • Capacity: 1.4 cu. yd. (1.07 cu. m)
    • Spreading Width: Up to 40′ (12.2 m)
    • 50/50 salt/sand and bulk salt, bagged rock salt (FFK-020 Free Flow Kit required for SP-7500)
    • Power: Electric, Dual 12-volt DC direct-drive motors

    More info. on the manufacturer’s website.

Tow Pro Spreaders

Unlike anything else on the market, the Tow Pro pulls behind vehicles for off-highway spreading applications, such as parking garages, parking lots and college campuses. And with its sizeable 1.4-cubic-yard capacity, this spreader easily handles a wide variety of bulk materials. Like the V-Maxx spreaders, the Tow Pro features a patented auger system, inverted “V” baffle, polyethylene construction, independent auger and spinner controls, and an attached vibrator.

  • SP7000

    Specifications:

    • Capacity: 1.4 cu. yd. (1.07 cu. m)
    • Mounting: Trailer-mounted with lawn and garden hitch
    • Spreading Width: Up to 30′ (9.2 m)
    • Spreading Materials: All materials

    More info. on the manufacturer’s website.


SaltDogg Spreaders

SaltDogg carries 5 distinct lines of Spreaders, ranging from light commercial solutions up to heavy-duty Municipal Hopper Spreaders for large 60,000 lb. GVW trucks.

SaltDogg Electric Drive Hopper Spreaders

The SaltDogg electric-drive spreaders are powered by 12-volt direct drive gear motors, and are available from 3/4 yard to 4 yard capacity.

The SHPE series SaltDogg® spreaders are completely self-contained, ultra–durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on utility vehicles, pickups, dump, platform and utility trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.

* Indicates Extended Chute

SaltDogg Gas Drive Hopper Spreaders

Available in stainless steel, powder coated carbon steel or rotationally molded polymer, these slide-in hopper spreaders are powered by a 10.5 HP gas engine.

* Indicates Extended Chute

SaltDogg Municipal Hopper Spreaders, 3, 4, & 4.5 Yd.

Available with either a 10.5 HP gas engine or two independent hydraulic motors, these stainless steel spreaders are designed for dump bodies and flatbeds with a GVW chassis of 15,000 to 26,000 lbs.

All of the models below have a 4-30 foot Spread Width, Conveyor Feed Mechanism, Stainless Steel Construction, & an 18" poly spinner.

Gas Powered Models:

These models are each powered by a 10.5 Horsepower Briggs & Stratton Intek Gas Engine

Hydraulic Drive Models:

These models are each powered by 2 Independent Hydraulic Motors (15 GPM @ 1,500 PSI)

SaltDogg Municipal Hopper Spreaders, 7, 8, & 9 Yd.

Stainless steel hopper spreaders for municipalities and contractors with a minimum 26,000 GVW chassis. These spreaders include two independent direct drive hydraulic motors.

All of the models below have a 4-40 foot Spread Width, Conveyor Feed Mechanism, Stainless Steel Construction, & a 20" poly spinner.

Hydraulic Drive Models:

These models are each powered by 2 Independent Hydraulic Motors (15 GPM @ 1,500 PSI)

  • 1450757SSH | Gearbox Ratio: 50:1 | Capacity: 7.0 cu yds | More Info.
  • 1425757SSH | Gearbox Ratio: 25:1 | Capacity: 7.0 cu yds | More Info.
  • 1450863SSH | Gearbox Ratio: 50:1 | Capacity: 8.3 cu yds | More Info.
  • 1425863SSH | Gearbox Ratio: 25:1 | Capacity: 8.3 cu yds | More Info.
  • 1450969SSH | Gearbox Ratio: 50:1 | Capacity: 12.2 cu yds | More Info.
  • 1425969SSH | Gearbox Ratio: 25:1 | Capacity: 12.2 cu yds | More Info.

SaltDogg Municipal Hopper Spreaders, 10 – 16 Yd.

Stainless steel hopper spreaders for municipalities and contractors with a minimum 34,000 GVW chassis. These spreaders include two independent direct drive hydraulic motors.

All of the models below have a 4-40 foot Spread Width, Conveyor Feed Mechanism, Stainless Steel Construction, & a 20" poly spinner.

Hydraulic Drive Models, Require a 34,000 lb. to 38,000 lb. GVW CHASSIS

  • 1451057SSH | Gearbox Ratio: 50:1 | Capacity: 8.76 cu yds (level) / 10.0 cu yds (rounded) | More Info.
  • 1421057SSH | Gearbox Ratio: 25:1 | Capacity: 8.76 cu yds (level) / 10.0 cu yds (rounded) | More Info.
  • 1451163SSH | Gearbox Ratio: 50:1 | Capacity: 10.28 cu yds (level) / 11.82 cu yds (rounded) | More Info.
  • 1421163SSH | Gearbox Ratio: 25:1 | Capacity: 10.28 cu yds (level) / 11.82 cu yds (rounded) | More Info.
  • 1451369SSH | Gearbox Ratio: 50:1 | Capacity: 11.82 cu yds (level) / 13.59 cu yds (rounded) | More Info.
  • 1421369SSH | Gearbox Ratio: 25:1 | Capacity: 11.82 cu yds (level) / 13.59 cu yds (rounded) | More Info.

Hydraulic Drive Models, Require a 48,000 lb. to 60,000 lb. GVW CHASSIS

  • 1451257SSH | Gearbox Ratio: 50:1 | Capacity: 10.22 cu yds (level) / 11.75 cu yds (rounded) | More Info.
  • 1421257SSH | Gearbox Ratio: 25:1 | Capacity: 10.22 cu yds (level) / 11.75 cu yds (rounded) | More Info.
  • 1451363SSH | Gearbox Ratio: 50:1 | Capacity: 12.0 cu yds (level) / 13.80 cu yds (rounded) | More Info.
  • 1421363SSH | Gearbox Ratio: 25:1 | Capacity: 12.0 cu yds (level) / 13.80 cu yds (rounded) | More Info.
  • 1451469SSH | Gearbox Ratio: 50:1 | Capacity: 13.8 cu yds (level) / 15.87 cu yds (rounded) | More Info.
  • 1421469SSH | Gearbox Ratio: 25:1 | Capacity: 13.8 cu yds (level) / 15.87 cu yds (rounded) | More Info.

Swenson Spreaders

Mid-State has 3 levels of Bed Mounted Spreaders available from Swenson:

Pick-up Truck Spreaders

Swenson has models available for 1/4 ton pick-ups up to 3/4 ton pick-up trucks, and can be powered in 3 configurations:

  • One 10.5hp gas Briggs engine
  • 2 electric motors (1 for the drag chain and a 2nd for the spin disk)
  • 2 hydraulic motors (1 for the drag chain and a 2nd for the spin disk)

There are two lines of Swenson Spreaders for light vehicles: the PV Spreader Series is available in a stainless or carbon steel construction, and ranges from a 1.8 to 2.0 cu. yd. capacity; the PolyHawk PV Spreader Series comes with a corrosion resistant polyethylene hopper (hopper has a 10 year warranty) and has a a 2.0 cu. yd. capacity.

These light and medium duty Spreaders are perfect for commercial contractors and municipalities, and much more detailed information is available here at Swenson’s site.

Medium Duty Truck Spreaders

The medium-duty line up of Spreaders are made for 1/2 ton+ vehicles, offer a 3.0 – 4.5 cu. yd. capacity for a range of materials including: Rock Salt, Sand, Salt / Sand Mix, Treated Rock Salt, Clear Path Ice Melt, Magnesium Chloride. This makes these V-Box Spreaders a great solution for heavier commercial contractors and municipalities. More information can be found here.

Heavy-Duty V-Box Spreaders

Made for 20,000 GVW+ vehicles, these Spreaders are a great solution for large contractors & municipalities who focus on large Parking Lots, Roads, and Highways. To learn more about these Spreaders, visit Swenson’s website here.

Henderson Manufacturing:

Henderson Mfg is another preferred brand MTE offers our customers. Henderson offers a full range of products that will fit any need:

  • HPS Lite Spreaders – Made for light-duty applications in smaller vehicles, more info. here.
  • FSP Spreaders – from 1.3 cu. yd. up to 4.1 cu. yd. capacities, the FSP line is a great product for commercial contractors and municipalities. The FSP products are designed to be installed in pick-up beds. For more information on the indvidual models available and their applications, visit Henderson’s product page here.
  • FSM Spreaders – the FSM fits all sizes of utility dump bodies and carries 3.0 cu. yds. up to 6.7 cu. yds. of material. Visit Henderson’s site for more info here.
  • FSH Spreaders – the legendary FSH-I, FSH-II, FSH-III product lines are made for large contractors and municipalities and offer massive performance possibilities. The FSH series has a capacity that ranges from 4.5 cu. yds. all the way up to 18.2 cu. yds. of material. Visit Henderson’s site for more info here.

Comments are closed.